Flame Retardant for All Kinds of Fabric, Non-Durable, for Padding Finishing Method

• Customization: Available
• CAS No.: 84402-58-4
• Formula: 282-758-4
• Model NO.: Mflam CS
• EINECS: C3h11n4o4p
• Certification: REACH
• Environmental Protection: Yes
• Color: Transparent
• Kind: Flame Retardant
• Appearance: Liquid
• Application: Padding
• Fabric: All Kinds of Fabrics
• Feature: Non-Durable Washing
• Solid Content: 50%
• pH: 6-7
• Transport Package: 1250kg IBC Drum, 140kg PE Drum, 250kg Iron Drum
• Trademark: Mflam
• Origin: China
• Package Size: 33.00cm * 18.00cm * 10.00cm
• Package Gross Weight: 1.500kg

Product Description

Flame retardant for all kinds of fabric, non-durable, for padding finishing method

Mflam CS

Specification:
 

Chemical Composition:	Aqueous mixture based on phosphorus and nitrogen organic compounds
Appearance:	Clear  liquid
Density  (20ºC):	about 1.2g/cm3
Solid content:	about 50%
PH:	6.0-7.0
Solubility	soluble in water
Shel life:	1 year in closed container (temperature @25ºC)

Properties:
No corrosion;
No adverse effect on the strength of the fabric;
Good thermal stability;
Can be sued in adverse climatic condition;
Compatible with different bonding agents combined (preliminary tests are necessary);
Normally no yellowing occur under high curing temperature ( up to 180 ºC );
Usually Compatible with softener, water and oil repellent combined (preliminary tests are necessary);
Particularly well suitable for special, problematic material composition and fabric texture;
Prolonged storage may cause turbidity, which does not influence the effects;

Application:
Mflam CS is suitable for cellulose, polyester, wool, polypropylene and polyethylene fibers and their blends. End uses are automotive textiles, mattress ticking, building materials, curtains and drapes, and decorative fabrics. Mflam CS finishes are compatible with other treatments, such as coatings and oil- and water-repellent finishes.
--Typical application process
Mflam CS is added to the bath with water by stirring at room temperature. Curing temperature is between 100-180ºC.
The using amount of Mflam CS is depending on the fabric texture and absorbability, flammability requirement, other auxiliaries in the bath, etc.
--Padding process
Cellulose:                300-450g/L, pick up 70%-100%, ( 10-14% dry add on fabric)
Wool :                      thin 230-270g/L,  thick 200-250g/L,  (8-12% dry add on fabric)
Auto decoration:      Cellulose  200-300g/L
                                Synthetic  preliminary tests are necessary
--Dipping process (i.e. curtain)
300g/L-500g/L, pick up 60- 70%, avoid the lose of the working liquid.
Curing temperature: 100-180ºC  (not higher than 180ºC)

Precaution:
Mflam CS may bring unexpected effect on the fabric ( i.e. color fastness, brightness, etc). Preliminary tests are necessary.
The above mentioned information is according to our own acknowledge and experience. It is advised to make lab trail and small batch trail before formal treatment to get optimum processing condition.

Package and Stock
250kg iron drum, 1250KG IBC Drum, 125kg PE drum..
Keep in cool and dry place.

Attention:
The above mentioned information of the formulation is for reference only. The customer should adjust according to their own products. But any problem, do not hesitate to connect with us.