Phosphorus Flame Retardant for Cotton Fabric to Obtain Durable Washing

• Customization: Available
• CAS No.: 55566-30-8
• Formula: C8h24o12p2s
• Model NO.: Mflam THPS
• EINECS: 259-709-0
• Certification: REACH, RoHS
• Environmental Protection: Yes
• Color: Clear Light Yellow
• Kind: Flame Retardant
• Appearance: Liquid
• Application: Proban
• Fabric: Cotton
• Feature: Durable Washing
• Active Content: 75%
• Phosphorus Content: 11% Min
• Transport Package: 250kg Plastic Drum, 1400kg IBC Drum
• Specification: Tetrakis Hydroxymethyl Phosphonium Sulfate
• Trademark: Mflam
• Origin: China
• HS Code: 3824999999
• Production Capacity: /
• Package Size: 8.00cm * 8.00cm * 20.00cm
• Package Gross Weight: 2.000kg

Product Description

Mflam THPS
Phosphorus Flame Retardant for Cotton Fabric to Achieve Durable Washing

Chemical Name:  Tetrakis Hydroxymethyl Phosphonium Sulfate
CAS:  55566-30-8
Specification:

Physical and Chemical properties
Active content	75%
Phosphorus content	≥11%
Viscosity m Pa.s (25°C)	<40
Density at 25 C  kg/L	1.35-1.42
PH Value	3-5
Appearance	Light yellow clear liquid
Fe content	<15mg/kg

Properties and Features

1. Mflam THPS is used as flame retardant for textile finishing, applicable to pure cotton or polyester cotton and other textile.
2. The treated textile has very good flame-retarding effect, good handle, strong washing resistance.
3. The treated textile has small tear strength loss with the original performances of fabrics not affected.
4. Good hand and drapability of treated fabrics.

Suitable Scope:
Suitable for all kinds of protective clothing, bedding, decorative items and children's flame retardant pajamas, etc., is the current durable cotton fabric flame retardant finishing method.
Introduction of Usage
Padding process:
Flame retardant finishing pad fluid (room temperature)→ preliminary drying (100 ~ 120 ºC) →ammonia smoked → oxidation washing → drying (130 ~ 140 ºC) →preshrinking → finished products
Reference :Generally, for thin fabrics, the amount of  THPS on the fabric should be more than 40% of the fabric weight, and the medium and thick fabrics can be 35 ~ 40%;
Dosage is determined by fabric type, construction, weight and the flame retardancy performance required.



Shipping Information:
The package is 250kg plastic drum or 1400kg IBC Drum, and can be loaded 20mt/22.4mt with pallet in one full 20FCL

Hazards identification: class 8
The substance is not subject to IMO TMDG.



Attention:
The moisture content:
After the fabric is soaked and rolled with flame retardant, a certain humidity is required to facilitate the cross-linking reaction between NH3 and the flame retardant on the fabric in the process of ammonia fumigation, so as to achieve the flame retardant effect and the washing resistance. In general, the moisture content should be controlled between 12% and 16%, and the error of left, middle and right moisture content should not exceed 2%, otherwise, it is very easy to produce left, middle and right colors.

Determination of ammonia flow:
The ammonia flow rate is usually controlled at 350 ~ 500L/min, the flow rate is too small, the crosslinking is not sufficient, and the flame retardant effect and washing resistance are poor. Excessive flow leads to waste and overflow of ammonia gas. In practical application, the ammonia flow rate should be adjusted according to the thickness of the fabric and the amount of flame retardant to achieve the best flame retardant effect.

Oxidant concentration:
In order to make the flame retardant more stable after being cured by ammonia, P+3 must be oxidized into P+5, which is usually achieved by rolling H2O2. The amount of H2O2 should be determined according to the thickness of the fabric and the amount of flame retardant. The usual dosage is 30 ~ 35% concentration. The speed of the oxidizing liquid cannot be too fast to ensure that there is enough H2O2 on the fabric, which can be oxidized by air and then washed away with neutralizing soap. The oxidizing time should not be too long, otherwise it will reduce the strength of the fabric.